1. Select a coating filter mesh with a suitable mesh size based on the viscosity and particle size of the coating. After the spraying is completed, the dirt on the filter screen should be promptly removed, and damaged filters should be replaced in a timely manner.
2. When diluting coatings or cleaning equipment, it is necessary to use solvents according to the rules of the coating to prevent abnormal deposition or agglomeration of the coating, which can block channels such as the coating filter, high-pressure valve port, high-pressure pipeline, and spray gun, and prevent spraying. Especially when diluting coatings, it is necessary to strictly follow the skill requirements of the coating to prevent affecting its performance.
3. The two major components of the cylinder and valve system should not be wiped with strong organic solvents, nor should they be soaked in strong solvents. All rubber seals in the equipment can only be cleaned with gasoline or non solvent based cleaning agents.
4. Cylinder, valve system, upper and lower pilot valves, oil mist device, pressure regulating valve and other pneumatic components should be cleaned, maintained and assembled to avoid rust, sand particles, dust and other dirt. Foreign objects on the intake filter element should be regularly removed to prevent a decrease in intake volume.
5. After the spraying is completed, the equipment should be cleaned in a timely manner. Otherwise, the solidified coating will increase the wear of parts such as the coating cylinder, piston rod, and sealing ring, and shorten the service life of the equipment.
6. When repairing and maintaining, if it is necessary to replace important components such as seals (rubber or PTFE), paint cylinders, piston rods, pressure bearing parts of paint hydraulic systems, springs, pneumatic motors, and valve systems, please choose the original matching products provided by our company to ensure the normal operation of the equipment.
